MPPT type Solar Controller
This product is designed for solar off-grid system (independent system), solar power plants and other systems. The new generation of MPPT Controller selection 16-bit digital signal processing chip. It adopts advanced all-digital intelligent tracking algorithm to obtain the maximum power point of solar modules, and real-time output current, voltage detection, to ensure the normal battery charging and improve the utilization of components. At the same time the system has short-circuit, overload, and a unique battery automatic shutdown, recovery and other full-featured protection measures.
Features
● All-digital intelligent tracking algorithm, the fastest access to solar modules maximum power point, the conversion efficiency up to 95%, high utilization of PV modules.
● Increase the charging strategy (first constant current, then constant pressure, the last float), protect the battery and extend its service life.
● All-digital intelligent control, with remote control.
● Standard MODBUS communication protocol to facilitate background detection.
● With overcharge, overload, short circuit and other sound protection, so that the machine is running more reliable.
● Wide input voltage range, to solve the problem of components should not be matched, selection more convenient.
● With lightning protection, solar anti-reverse charge, battery reverse, open circuit protection.
● Small size, light weight, rack design.
● Small power and DC power distribution cabinet group screen, high power can be more than a parallel group counters, easy maintenance.
● Single maximum 100A, can be expanded according to demand.
● Touch screen display, beautiful atmosphere.
Technic Parameter
Model | XSD220-50A | XSD220-100A | XSD384-100A |
Controoler spec. | rated voltage(V) | 220 | 384 |
rated charging current(A) | 50 | 100 | 100 |
Max. input voltage from battery(V) | 300 | 550 |
Max. Input solar voltage(V) | 500 | 850 |
Max. Input solar power(W) | 11000 | 22000 | 38400 |
charging mode | 1 |
battery float voltage(Vdc) | MPPT |
battery charging average voltage(Vdc) | 247 | 440 |
self loss(mA) | <300 |
communication | RS485 |
rated efficiency | ≥95% |
protect degree | IP20 |
Working enviroment | 工working temperature | -20℃~+50℃ |
relative humidity | <90% No condensing |
Altitude | 4000m |
Pressure endurance insulation | 1500VAC,1minute |
Noise(1meter) | ≤50dB |
Protection function | Protection for input connecting contrary, input short of voltage, output over load, output short circuit and over heat. |
protect breaker | need extra input and output braker |
dimension(W*L*H)mm | 482*450*222(5U) |