Solar Inverter Built In Controller
This product is specially designed solar pump inverters. Solar Pump Inverter transfer solar DC current to be AC to drive the water pump to work. With maximum power tracking (MPPT), light weak sleep, light intensity wake-up, protection for well lack of water,protection for tank full of water, underload protection, photovoltaic and grid automatic switching, unattended automatic operation and other control and protection functions.
Products overview
Solar Inverter With Controller is a new generation of new energy power generation system, it is aimed at the characteristics and requirements of new energy power generation system. The system uses the energy generated by the solar panels, charge the battery through controller while the battery provide electrical power for the inverter, after inverter provide electrical power for the load, light energy use higher efficiency. The BSC series combine solar inverter and controller into one, and special design for pastoral areas, islands, villages and other small solar station, can be provide within rated power for the household appliances, instruments, meters, color TV, satellite receiver and automotive equipment.
1. Equipped with MPPT Solar Charge Controller to maximize and regulate DC power from the solar array for charging the battery bank.
2. Transformer-less design provides reliable power conversion in compact size and with high efficiency.
3. With aluminum housing, lntegrated interface system, It's light and handy, making installation easier. lt's the ideal inverters for small PV plants, or individually for small house,both indoors and putdoors.
Technic Parameter
| Model | XSC24-500 | XSC24-1000 | XSC48-2000 | XSC48-3000 |
| Inverter |
| Rated power (W) | 500 | 1000 | 2000 | 3000 |
| Permitted AC input current(Vac) | 220±15% |
| AC input rated current(A) | 2.27 | 4.55 | 9.09 | 13.64 |
| DC input rated voltage (Vdc) | 24 | 48 |
| DC voltage range (Vdc) | 21.6~35 | 42~80 |
| DC under-voltage protection point (Vdc) | 21.6 | 42 |
| DC over-voltage protection point (Vdc) | 35 | 80 |
| Output waveform | Sine wave |
| Output voltage accuracy | AC220V±3% |
| Output frequency accuracy | 50Hz±0.2 |
| Rated output current (A) | 2.27 | 4.55 | 9.09 | 13.64 |
| Output waveform distortion rate(THD) | ≤3%(Linear load) |
| Dynamic response (load0~100%) | 5%,≤30ms |
| Power factor(PF) | 0.8 |
| Inverter efficiency (80% resistive load) | >80% | >82% |
| Overload | 120%,60s |
| Inverter protection | Battery under-voltage protection, battery over-voltage protection, output overload protection, overheat protection, lightning protection |
| Controller |
| Maximum open circuit voltage (Vdc) | 50 | 100 |
| The maximum charging current (A) | 15 | 20 | 30 | 40 |
| Battery under-voltage protection point (Vdc) | 21.6 | 42 |
| Battery under-voltage recovery point (Vdc) | 24 | 48 |
| Battery over-voltage protection point (Vdc) | 29 | 58 |
| Battery over-voltage recovery point (Vdc) | 27 | 54 |
| Rated efficiency | ≥95% |
| Work environment |
| Using condition temperature | -25°C~+50°C |
| Humidity | <90% no condensing |
| Altitude | <5000m(when over 1000 meters according to GB/T3859.2 reduce the using amount) |
| Insulation strength (input and output) | 1500VAC,1minute |
| Noise (1meter) | ≤40dB |
| Dimension(w*D*H) | 400*420*500(Including battery box) | 482*420*177mm |
